Salter Labs, Arvin, CA - Manufacturers of oxygen delivery cannulas and equipment and sleep diagnostic cannulas and equipment.

MESSAGE FROM THE PRESIDENT
In the past three decades our quest for excellence has resulted in more than 150 new products...
More...

AccessoriesCheck out our products below. Download the PDF file for more information.

	Tender Grip® Adult A unique skin fixation system designed to hold the cannula head tubing and face piece in position. It is easy to apply, allows the skin to breathe, holds securely and leave the fixed object clean without messy residues. Available in a package of 25 pairs or dispenser roll of 100.
	Tender Grip® Infant and Newborn A unique skin fixation system designed to hold the cannula head tubing face piece in position, even with a very active infant or newborn. This is an ideal pairing with the Salter-Style® children’s sizes of oxygen Cannulas. Available in 10 or 25 per case.
	E-Z Wrap™ Soft, closed-cell foam tube cushions that slide over the head or face tube of an oxygen cannula. This will provide a cushion to reduce chafing or pressure to the sensitive tissue in the over the ear area. (Please see the system pre installed on the Salter-Style® TLCcannula™) P/N 1016 packaged 50 to a case.
	Standard Mouthpiece A plastic Mouthpiece used in nebulizer treatment kits. Bulk packed 50 per case.
	Nipple Nut Assembly Tapered and ribbed, one piece, nipple nut assembly allows secure tubing connections. Wing nut is integral to the assembly and allows threading the assembly on to standard oxygen threaded connectors of regulators or flow meters. P/N 1205 Bulk packed 50 per case.
	Ventilator Circuit Adapter 90° elbow, clear, with a suction port and attached cap. Tapered 15mm fitting to accommodate endotracheal tube connections. P/N 1025 (right side of picture) bulk packed 50 per case.
	Anesthesia Circuit Fitting Anesthesia circuit fitting with nipple to add supplemental oxygen. P/N 1030 (left side of picture) bulk packed 10 or 25 per case.
	Start-Up-Kits A time saving single pack which contains the single patient pieces needed to set up a new supplemental oxygen user. This allows the clinician to arrive at bed side with all components necessary to begin therapy. P/N 7107:Two (2) P/N 1606 Nasal Cannulas with one (1) P/N 2002 7’ three channel oxygen supply tube and one (1) P/N 7100 Humidifier with quad nut. Packed 20 to the case. P/N 7125: Same as P/N 7107 but with 25’ tube. P/N 7150: Same as P/N 7107 but with 50’ tube. *Please indicate if you prefer P/N 7600 Humidifier.
	Convenience Kits These kits are assembled with the components used when changing out a patient’s oxygen delivery circuit. P/N 2072: Two (2) P/N 1606 Nasal Cannulas with one (1) P/N 2002 7’ three-channel oxygen supply tube. Packed 25 to the case. P/N 2252: Same as P/N 2072 but with 25’ tube. P/N 2502: Same as P/N 2072 but with 50’ tube. Convenience kits with smooth bore tubing available on request. Please note, for Custom Convenience or Start up Kits contact your local Salter Sales Representative or call 1-800-235-4203.

ADOBE READER Many of the products on this site have a PDF download. In order to view these files, you must have adobe reader installed. We suggest having the latest version. If you do not have Adobe Reader or would like to upgrade to the latest version, please click on the "Get Adobe Reader" button below to go to Adobe's web site and download it.